Lexmark 2500 Series 유지 관리 매뉴얼 - 페이지 3

{카테고리_이름} Lexmark 2500 Series에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 2500 Series 4 페이지. Forms printer

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Use the listed part numbers to order printer supply items you will need.

Supply item

Parallel cable

USB cable

Serial adapter and cable

Printer ribbon

Removing the ribbon cartridge

Turn the printer off.

Lift the left and right release latches on the ribbon access cover to remove it.

Place the ribbon access cover on a flat surface.

Set the forms thickness lever to position 7.

Squeeze the left and right latches on the ribbon cartridge to lift it out of the printer.

Preparing the printer for cleaning

Turn the printer off.

Unplug the power cord from the wall outlet.

CAUTION—HOT SURFACE: The printhead may be hot. If so, allow it to cool before touching.

Squeeze the left and right latches on the ribbon cartridge, and then lift it out of the printer.

Every few months, use a soft brush and a vacuum to remove dust, ribbon lint, and pieces of paper from the printer.

Vacuum any dust from around the printhead and from inside the printer.

Part number

1329605 (10-foot cable)

•

1427498 (20-foot cable)

•

12A2405

12T0154 (Serial Interface option)

1038693 (50-foot cable)

11A3540 (2400/2500 series standard re-inking ribbon)

•

11A3550 (2500 series high yield re-inking ribbon)

•

Note: Printer ribbons can be ordered from the Lexmark Web site at www.lexmark.com.

Maintaining the printer