HIKVISION HiWatch Series 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} HIKVISION HiWatch Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiWatch Series 20 페이지. Hd turret and bullet camera
HIKVISION HiWatch Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (18 페이지), 방법 (4 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
Chapter 2 Installation and Connections
2.1 Device Installation
During the device installation:
● Use brackets for rack mounting.
● Ensure ample room for audio and video cables.
● When routing cables, ensure the bend radius of the cables are no less than five times of its
diameter.
● Allow at least 2 cm (≈0.75 inch) of space among racks mounted devices.
● Ensure the device is grounded.
● Environmental temperature should be within the range of -10 °C to 55 °C (14 °F to 131 °F).
● Environmental humidity should be within the range of 10% to 90%.
2.2 HDD Installation
Disconnect the power from the device before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Tools Required: Screwdriver.
2.2.1 Fix-on-Bottom Installation
Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device
bottom.
Steps
1. Remove the cover from device by unfastening the screws on panels.
Figure 2-1 Remove Cover
2. Connect the data cable and power cable.