JAMO DMR 61 사용 설명서 - 페이지 7
{카테고리_이름} JAMO DMR 61에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. JAMO DMR 61 18 페이지. Jamo dvd receiver user manual
JAMO DMR 61에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지)
페이지 인쇄
System Setup
To access the DMR 61 setup menu, press "SETUP".
Use / / / to browse through the menus, and press "OK" to select an item.
To exit System Setup, press "SETUP".
SYSTEM SETU P
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
SYSTEM SETU P
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
SYSTEM SETU P
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
NTSC
PAL
SCART / S-VIDEO
COMPONENT
PROGRESSIVE
HDMI
4:3 LB
4:3 PS
16:9
TV SYSTEM
Choose between NTSC and PAL video output from the DMR
61.
The default setting should be appropriate for your region
- changing it may result in poor picture quality
VIDEO
Video output selection enables you to choose the type of
video output suitable for your DVD system. The default set-
ting is SCART (RGB) or S-Video, depending on country.
Note:
1. If you choose the PROGRESSIVE SCAN video option, which
is only delivered through component output, you must en-
sure beforehand that your TV is capable of showing progres-
sively scanned images.
2. SCART, S-Video and composite video outputs are always
on. If you get a black screen when choosing the PROGRES-
SIVE function, please connect your TV with one of these con-
nections so you can reset PROGRESSIVE.
TV TYPE
You can select the aspect ratio that is appropriate for your TV
display. The default setting is 16:9.
• 4:3 LB
If you have a conventional 'square' set
and would like to see the DVD picture
in its full format, use this setting. Wide
bands will be displayed on the upper
and lower portions of the TV screen.
• 4:3 PS
If you have a conventional TV set and
would like to see the DVD picture fill
your TV screen then use this setting. A
wide picture is displayed on the whole
TV screen with a portion automatically
out off.
• 16:9
If you have a widescreen TV set, use this
setting (you must also set your wide-
screen TV to it's 16:9 mode.).
9