HIKVISION HWD-7108MH-G2 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} HIKVISION HWD-7108MH-G2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HWD-7108MH-G2 18 페이지.

During installation of the DVR:



Use brackets for rack mounting.



Ensure ample room for audio and video cables.



When routing cables, ensure that the bend radius of the cables are no less than five times than its

diameter.



Connect the alarm cable.



Allow at least 2 cm (≈0.75-inch) of space between racks mounted devices.



Ensure the DVR is grounded.



Environmental temperature should be within the range of -10 to +55º C, +14 to +131º F.



Environmental humidity should be within the range of 10% to 90%.

Before you start

Before installing a hard disk drive (HDD), please make sure the power is disconnected from the DVR. A factory

recommended HDD should be used for this installation.

One or two SATA hard disks can be installed depending on different models.

Tools Required: Screwdriver.

As the installation steps of HDD are similar among different models, here we just take an example.

Step 1 Remove the cover from the DVR by unfastening the screws on the back side.

Step 2 Connect one end of the data cable to the motherboard of DVR and the other end to the HDD.

Digital Video Recorder Quick Start Guide

Chapter 2 Installation and Connections

Figure 2-1 Remove Cover