AIRFUSION LD-CD52BN/AB 매뉴얼 - 페이지 8

{카테고리_이름} AIRFUSION LD-CD52BN/AB에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRFUSION LD-CD52BN/AB 19 페이지.



Loosen 2 screws from the bottom of the mounting bracket.



Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the

mounting bracket, turn canopy until it locks in place at the narrow section of the key holes, secure it by

tightening the two set screws.



Finally attach the canopy cover to canopy and secure it by pushing the lugs into the holes.



Attach the blade to blade bracket kit and secure the blade to blade holder by tightening 3 screws. Fig. 11



Attach the blade bracket assembly to motor and secure it by tightening the 2 screws. Fig. 12



Repeat to install the other blades.



Finally install the bottom cover to shaft of motor by rotating it clockwise.

Fig. 10

FINISHING THE INSTALLATION

Fig. 9

Fig. 11