Avantree Sacool Pro 사용자 설명서 - 페이지 2

{카테고리_이름} Avantree Sacool Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantree Sacool Pro 4 페이지.

2.2 Connect with PC/notebook

STEP 1 Turn Sacool Pro off (press and hold MFB button for 4s). The LED indicator flashes red and

you will hear "power off".

STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.

STEP 3 Activate Bluetooth on your PC/notebook and select "Avantree Sacool Pro".

NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you

may need a Bluetooth audio adapter to add the feature on PC/notebook that does not support

A2DP. For details on how to set up with PC/notebook, please see support.avantree.com

2.3 Connect with two mobile phones simultaneously

STEP 1 Connect headset with the first phone as above. Then Turn off Bluetooth of the first phone.

STEP 2 Connect headset with the second phone as above. Then turn off the headset.

STEP 3 Turn on Bluetooth of the first phone. Then Turn on the headset.

STEP 4 It will automatically connect with the second phone, after that please tap from the first

phone to manually connect it.

3. How to wear the Sacool Pro

STEP 1 Hold the headset as shown, with the button side in your left hand.

STEP 2 Put the earbuds in your ears, with the cord over the ears and to back of your head.

STEP 3 Adjust position of earbuds in your ears for maximum comfort.

STEP 4 Adjust length of cable using the silicone piece to make the headset secure.