Garden Oasis 50-34335A-3673 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Garden Oasis 50-34335A-3673에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Oasis 50-34335A-3673 3 페이지. Oxford cushioned bench

IMPORTANT!! PLEASE READ ENTIRE

INSTRUCTION SHEET BEFORE ASSEMBLY!!

TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE

KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT

Step 1: Identify all parts packed in the carton against the parts list. Removw all protective materials.

If any parts are missing or damaged, call our Customer Service Center at 1-800-416-3511.

Do not attempt assembly if any parts are missing or damaged.

ASSEMBLY NOTE: The "Left" and "Right" legs are determined facing the sofa, not sitting

in the sofa.

Step 2: With the help of another person, turn the seat frame in the upright position. Attach back frame

to seat using 5/16"x35 mm bolts and washers as shown in Fig. 1. Guide bolts through holes

in the seat frame, intopre-drilled holes in the back fram. Hand tighten only.

Step 3: Carefully note assembly procedure for chair right leg. Assembly of chair rightleg to seat and

back frame requires use of a 5/16" x 20mm bolts and 1/4" x 25mm bolts and 1/4" x 35 mm

bolts and (thre total). First, position right leg in seat frae, using a 1/4" x 25mm bolt and

1/4" x 35 mm bolt asshown in Fig. 2A. Add a washer to the end of the 1/4" x 25 mm bolt.

Guide these bolts through holes in right leg, into pre-drilled hole in the seat frame. Hand

tighten only. Finally position right leg in back frame, using a 5/16" x 20 mm bolts (H) and

washer as shown in Fig. 2B. Guide bolt through hole in seat frame, into pre-drilled hole in

the right leg. Hand tighten only. Repeat entire procedure (Fig. 2A & Fig. 2B) for left leg.