Lexmark 33S0408 - E 350dt B/W Laser Printer 빠른 참조 - 페이지 18
{카테고리_이름} Lexmark 33S0408 - E 350dt B/W Laser Printer에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 33S0408 - E 350dt B/W Laser Printer 19 페이지. Lexmark e250d: quick start
Lexmark 33S0408 - E 350dt B/W Laser Printer에 대해서도 마찬가지입니다: 설치 (2 페이지)
페이지 인쇄
7
Lift the green flap at the front of the printer, and remove the jammed pages from behind the
flap.
8
Open the rear exit door, and remove the jammed pages.
9
After you have cleared the jammed pages, reinstall the print cartridge assembly, and securely
close all the printer doors.
10
Press Continue
Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the
memory that holds the image of a page may be reused after the page is printed but
before it has successfully exited the printer if that memory is needed for another
use. Therefore, a jammed page may or may not be reprinted, depending on the
overall memory usage of the printer.
CAUTION:The fuser or fuser area may be hot.
to resume printing.
Clearing jams
18