Lexmark 340n - X B/W Laser 문제 해결 매뉴얼 - 페이지 5

{카테고리_이름} Lexmark 340n - X B/W Laser에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 340n - X B/W Laser 5 페이지. Sending a fax using the computer
Lexmark 340n - X B/W Laser에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 팩스 매뉴얼 (4 페이지)

페이지 인쇄
Lexmark 340n - X B/W Laser 문제 해결 매뉴얼
4
Press
.
5
Press
or
repeatedly until Prefix
appears.
6
Press
.
7
Enter the numbers you would like to have
dialed before each telephone number.
8
Press
.
9
Press Stop to return to the Ready prompt.
•
If you used a Speed Dial button:
–
Check to make sure it has been
programmed for the number that you wish
to dial.
–
As an alternative, dial the telephone
number manually.
MFP receives a blank fax
•
Ask the sender to verify the original document
was loaded correctly.
•
Check the toner cartridge, and replace it if
necessary.
Received fax has poor quality
Ask that the sender:
•
Check that the quality of the original document
is satisfactory.
•
Resend the fax. There may have been a
problem with the quality of the telephone line
connection.
•
Increase the fax scan resolution.