Avantree HT3189 사용자 설명서 - 페이지 10

{카테고리_이름} Avantree HT3189에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantree HT3189 10 페이지. Wireless headphone transmitter set
Avantree HT3189에 대해서도 마찬가지입니다: 빠른 사용 설명서 (8 페이지)

페이지 인쇄

Add a 2nd pair of headphones

• Powering up the transmitter, then turn on the HT3189 headphones and transmitter - they will

connect automatically. Now, turn o the headphone.

• Enter the transmitter into PAIRING MODE manually - Press and hold the MFB button for 5 seconds

until the LED ashes

• Place your 2nd set of headphones into Bluetooth PAIRING MODE (please refer to your 2nd head

phones' user manual).

• Keep the devices close to each other and wait. Once connected, LED on transmitter and headphones

will slow down at the same time.

• Now turn back on the rst headphone, it should auto reconnect to the transmitter.

For Next Use, the 2nd headphones will also auto reconnect to the transmitter once turn on. If not, you

will need to turn o and on both transmitter and 2nd headphones again, or click once on 2nd head-

phones.

Headphone charging

Please charge the headphones if you hear the "low battery" voice prompt. You can charge using a

phone charger (5V/500mA-2A output), PC USB port, TV USB port or any other USB outlet using the

included USB cable. It takes about 3.5 hours to fully charge the headphones. The LED will turn

during charging and turn o once charging is complete.

Troubleshooting

https://support.avantree.com/hc/en-us/sections/115000928623-HT3189-BTHT-3189-BLK-

RED

and BLUE.

RED