Lexmark 34A0252 빠른 참조 - 페이지 2
{카테고리_이름} Lexmark 34A0252에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 34A0252 5 페이지. Troubleshooting guide
Lexmark 34A0252에 대해서도 마찬가지입니다: 종이 매뉴얼 (1 페이지), 문제 해결 매뉴얼 (10 페이지)
페이지 인쇄
7
Align the tray, and insert it.
8
If a different type of paper was loaded than the type previously
loaded in the tray, change the Paper Type setting for the tray
from the control panel. For more information, see "Setting the
Paper Size and Paper Type" on page 3.
Loading the optional 550-sheet
tray
The optional 550-sheet drawer consists of a 550-sheet tray and a
support unit. This tray is loaded in the same way that the standard
tray is loaded. The only differences between the trays are the look
of the guide tabs and the location of the paper size indicators, as
shown in the following illustration. When the 550-sheet tray is
loaded for the first time or when a new size is loaded, remove the
tray completely from the support unit.
1
Width guide tabs
2
Size indicators
3
Length guide tabs
4
Size indicators
Note: If the same paper size is loaded again, the tray does not need
to be completely removed from the support unit. Just remove and
load the paper without adjusting the guides.
2
Loading the multipurpose
feeder
1
Push the multipurpose feeder latch to the right.
2
Pull the multipurpose feeder door down.