Avantree HT5009 사용자 설명서 - 페이지 3
{카테고리_이름} Avantree HT5009에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantree HT5009 9 페이지. Wireless headphones and transmitter set
페이지 인쇄
- 1. Table of Contents
- 2. What's in the Box
- 3. Products Overview
- 4. LED Indication & Voice Prompts
- 5. Turn on HT5009
- 6. Use HT5009 with Your
- 6. Check Your Tvs Output Options before the Set
- 6. Tvs with OPTICAL Audio out
- 6. Tvs with Aux/3.5Mm Audio out
- 6. Tvs with RCA Audio out (Red/White Ports Labeled "AUDIO OUT")
- 7. Use HT5009 with Your AV Receiver with 6.35Mm PHONE Jack
- 8. Use the Headphones Independently with Cellphone
- 8. Add a 2 Nd Pair of Bluetooth Headphones
- 9. Charging Headphones
- 10. Clear Pairing History
- 11. Troubleshooting
LED indication & voice prompts
1) LED indicators of the transmitter (Oasis Plus)
Status
Pairing
Connected with AS9S
nd
Connected with 2
headphones
Reconnecting
2) LED Indictors & voice prompts of headphones (AS9S)
Status
Power on
Power off
Pairing
Connected with Oasis Plus
Reconnecting
Charging/Charging
completed
Low battery
Turn on HT5009
1) Powering up the transmitter
Power up the transmitter with the USB cable provided. Connect it to a TV USB port (TV needs to be turned
on) or any other USB charger that supports 5V/500mA-2A.
2) Turn on both devices
Turn on the transmitter – Slide Mode switch to "TX" position, the "TX" LED will start flashing WHITE.
LEDs indication
LED "TX" flashes alternating
LED "A" is on
LED "B" is on
LED "TX" flashes WHITE once per second
Status
BLUE
LED is on for 1 second
RED
LED is on for 2 seconds, then turn off
RED
and
BLUE
LED flashes alternately
BLUE
LED on
BLUE
LED flashes once per 2 seconds
RED
LED on/off
RED
LED flashes
GREEN
and WHITE
Voice prompt
Welcome to Avantree
Good bye
Pairing
Connected
NA
NA
Low battery
2