KitchenAid YKERS303BWH1 사용자 지침 - 페이지 6
{카테고리_이름} KitchenAid YKERS303BWH1에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid YKERS303BWH1 20 페이지. 30" (76.0 cm) freestanding electric ranges
KitchenAid YKERS303BWH1에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (16 페이지)
KEYPAD
FEATURE
INSTRUCTIONS
OPTIONS
Oven use
functions
Enables you to personalize the audible tones and oven operation to suit your needs. See the
"Oven Use" section.
COOKTOP
USE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
Lo
I
OFF
I
Hi
Med
The control knobs can be set to anywhere between HI and LO.
Push in and turn to setting.
I REMEMBER:
When range is in use, the entire cooktop area
I
I
may become hot.
I
Ceramic Glass
The surface cooking area will glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. This is normal operation. It will also randomly cycle
off and back on again, even while on High, to keep the cooktop
from extreme temperatures.
It is normal for the surface of ceramic glass to appear to change
color when surface cooking areas are hot. As the glass cools, it will
return to its original color.
Clean the cooktop after each use to help avoid scratches,
pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended
for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
31605 contains all of the items needed to clean and condition your
ceramic glass cooktop. Refer to the "Range Care" section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
•
Avoid storing jars or cans above the cooktop. Dropping a heavy
or hard object onto the cooktop could crack the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills using
a scraper while the surface is still warm. If sugary spills are
allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
To avoid scratches, do not slide cookware or bakeware across
the cooktop. Aluminum or copper bottoms and rough finishes
on cookware or bakeware could leave scratches or marks on
the cooktop.
Do not cook popcorn in prepackaged
aluminum containers on
the cooktop. They could leave aluminum marks that cannot be
removed completely.
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part
of the entire cooktop.
To avoid damage to the cooktop, do not use the cooktop as a
cutting board.
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1/2"(1.3 cm)
outside the area.
/
_
'_.............................
B
/
\
!
\
\
/
A. Surface cooking area
B. Cookware/canner
C. _/2"(1.3 cm) maximum overhang
Use flat-bottomed cookware for best heat conduction and energy
efficiency. Cookware with rounded, warped, ribbed or dented
bottoms could cause uneven heating and poor cooking results.
Determine flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no
space or light should be visible between it and the cookware.
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry before
using them. Residue and water can leave deposits when heated.
To avoid damage to the cooktop, do not cook foods directly on
the cooktop.
Cooktop
On Indicator
Light
The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On indicator light will glow.