Lexmark 34S0409 - E 360dt B/W Laser Printer 유지 관리 매뉴얼 - 페이지 7
{카테고리_이름} Lexmark 34S0409 - E 360dt B/W Laser Printer에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 34S0409 - E 360dt B/W Laser Printer 10 페이지. Loading paper
Lexmark 34S0409 - E 360dt B/W Laser Printer에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (8 페이지), (독일어) 보충 설명서 (9 페이지)
페이지 인쇄
5
Install the new toner cartridge by aligning the rollers on the toner cartridge with the arrows on the tracks of the
photoconductor kit. Push the toner cartridge in as far as it will go. The cartridge clicks into place when correctly
installed.
6
Close the front door.
Replacing the photoconductor kit
The printer automatically notifies you before the photoconductor kit reaches a page maximum by showing 84 PC
Kit life warning or 84 Replace PC Kit on the display. You can also see the status of the photoconductor
kit by printing a menu settings page.
When 84 PC Kit life warning or 84 Replace PC Kit first appears, you should immediately order a new
photoconductor kit. While the printer may continue to function properly after the photoconductor kit has reached its
official end‑of‑life, print quality significantly decreases.
Note: The photoconductor kit is one item only.
1
Turn the printer off.
2
Open the front door by pressing the button on the left side of the printer and lowering the front door.
3
Pull the photoconductor kit and toner cartridge out of the printer as a unit by pulling on the toner cartridge handle.
Note: The photoconductor kit and toner cartridge form a unit.
Maintaining the printer
7