Lexmark 350 매뉴얼 - 페이지 11
{카테고리_이름} Lexmark 350에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 350 13 페이지. Setup solutions
Lexmark 350에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 설정 지침 (2 페이지)
페이지 인쇄
S
3
OLUTION
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
S
4
OLUTION
1
Disconnect the USB cable from any other device, such as a USB hub or switch box.
2
Directly connect the cable to the printer and the computer.
Photo does not print
S
1
OLUTION
If an error message is displayed, see "Error messages" in the "Troubleshooting" chapter of the User's Guide on the
CD.
S
2
OLUTION
If the
light is not on, see "Power button is not lit" on page 10.
S
3
OLUTION
Remove and then load paper. For more information, see "Loading paper" in the "Loading paper" chapter of the
User's Guide on the CD.
S
4
OLUTION
Check the ink level, and install a new print cartridge if necessary. For more information, see "Installing the print
cartridge" in the "Maintaining the printer" chapter of the User's Guide on the CD.
S
5
OLUTION
If the printer is connected to the computer through another device:
1
Disconnect the USB cable from any other device, such as a USB hub or switch box.
2
Directly connect the cable to the printer and the computer.
S
6
OLUTION
1
Press
to turn the printer off.
2
Disconnect the power supply cord from the wall outlet.
3
Disconnect the other end of the power supply cord from the printer.
4
Reconnect the power supply cord to the printer.
USB symbol.
11