Avantree Roxa 사용자 설명서 - 페이지 2

{카테고리_이름} Avantree Roxa에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantree Roxa 8 페이지. Bluetooth 4.0 home music receiver

3. Setting up your Bluetooth home music receiver

A） The red LED will go on automatically when the device is plugged into a standard AC socket

B） Plug the 3.5 mm audio cable end into Roxa's 3.5 mm audio socket, and plug other end ( or 2 x RCA ) into the audio input on of

your home stereo system. Roxa's blue LED will go on. 10 seconds later it will enter into pairing mode – the red and blue LEDs will

blink quickly. Pairing mode will last 2 minutes.

C） Paired with Bluetooth phone / tablet / PC or other Bluetooth transmitter

D） After successfully pairing and connect, you can enjoy music from your home stereo speaker, and control play-list via your phone

within 10 meter range.

4. Pairing with a Bluetooth device ( Tutorial online)

A ) Enter into pairing mode

Function

Power on

Turn on Bluetooth

Enter pairing mode

Turn off Bluetooth

Notes:

The pairing mode will last 2 minutes, Roxa will into standby mode automacically, if no devices can be connected and paired within 2

minutes.(Based on if the 3.5 mm cable is still plugged into the Roxa's 3.5 mm jack port of Roxa).

B） Pairing with Bluetooth phone / tablets :

Pls. make sure your phone has Bluetooth function and it is available. The pairing procedures are different for different devices. Please

refer to your cell phone / tablets / laptop / desktop user manual for further instructions.

Operation

Plug Roxa into standard AC socket

Plug 3.5 mm audio cable end into Roxa's

3.5 mm audio jack of Roxa

Roxa

will

enter

pairing

automatically when turn on

Pull the 3.5mm audio cable from Roxa's

3.5 mm audio jack

LED indicator

Red Led stays on.

Red Led off, and Blue Led blinks every

1 seconds. ( lasting for 10 seconds)

mode

Blue & red Led light blinks alternately

and quickly ( lasting for 2 minutes)

Blue LED off, Red Led stays on.