Lexmark 450dn - E B/W Laser Printer 인쇄 매뉴얼 - 페이지 9
{카테고리_이름} Lexmark 450dn - E B/W Laser Printer에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 450dn - E B/W Laser Printer 17 페이지. Help menu pages
Lexmark 450dn - E B/W Laser Printer에 대해서도 마찬가지입니다: 설정 및 설치 (2 페이지)
페이지 인쇄
Print defects guide
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best
matches the defects on the print job indicates which particular part may be causing the defect.
For example, the distance between these two marks represents
a repeating defect that occurs every 38.2 mm (1.5 in.), which
means the charge rollers may need to be replaced.
Replace the
transfer roller
Replace the
charge rollers
38.2 mm
(1.5 in.)
Note: If the defect appears on the printed side of a single-sided print
Replace the toner cartridge
Developer roll
defect
47.8 mm
(1.88 in.)
51.7 mm
(2.04 in.)
job, replace the toner cartridge before replacing the fuser.
Photoconductor
defect
96.8 mm
(3.81 in.)
Print defects guide
Page 1 of 1
Replace the fuser
Backup roller
Fuser belt
defect
defect
79.8 mm
95.5 mm
(3.14 in.)
(3.76 in.)