Lexmark 502n - X Color Laser 설정 매뉴얼 - 페이지 17

{카테고리_이름} Lexmark 502n - X Color Laser에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 502n - X Color Laser 18 페이지. Setup sheet
Lexmark 502n - X Color Laser에 대해서도 마찬가지입니다: 매뉴얼 사용 (1 페이지), 설정 시트 (2 페이지)

페이지 인쇄
Lexmark 502n - X Color Laser 설정 매뉴얼
7
Configuring SMTP
To configure SMTP settings, select SMTP from the Network Setup menu on the left side of the Web page, and then fill in
the information as described. This must be set up in order for scan to e-mail or alerts messages to function. Most of this
information can be found on your e-mail service provider's Web site.
Field
Primary SMTP Server
Port Number
Authentication Method
User Name
Password
Description
Enter the address of your SMTP server. This information can be found by contacting your
e-mail provider or looking on their Web site.
The port that your SMTP server uses. Unless it is specified otherwise by your e-mail
provider, leave this number set to 25.
Some SMTP servers require authentication. If your e-mail provider requires
authentication, select the appropriate method from the drop-down list.
The user name for SMTP Authentication. If authentication is not required, this field is left
blank.
The password for SMTP Authentication. If authentication is not required, this field is left
blank.
Configuring SMTP
17