Lexmark 502n - X Color Laser 설정 매뉴얼 - 페이지 4
{카테고리_이름} Lexmark 502n - X Color Laser에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 502n - X Color Laser 18 페이지. Setup sheet
Lexmark 502n - X Color Laser에 대해서도 마찬가지입니다: 매뉴얼 사용 (1 페이지), 설정 시트 (2 페이지)
페이지 인쇄
1
Overview
All of the features described in this guide must be set up through the Embedded Web Server. To access the Embedded
Web Server:
1
Open a Web browser.
2
In the address bar, type the network printer or print server IP address, and then press Enter.
If you do not know the IP address of the printer, it can be determined by printing a configuration page from the printer. To
print the configuration page:
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press
or
4
Press
or
After the Configuration Page prints, Ready appears. The IP address can be found on the right side of the first page.
After you open the Embedded Web page, select Scan Destination from the Directory menu on the left side of the page to
set up a new scan destination.
.
repeatedly until Reports Print appears, and then press
repeatedly until Configuration Page appears, and then press
Overview
4
.
.