Jands Stage 12 매뉴얼 - 페이지 12

{카테고리_이름} Jands Stage 12에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jands Stage 12 17 페이지.

Working with Grabs

The Stage 12/24 has two (2) fully independent Grab controls.

The Grab Controls:-

Grabbing a Scene

•

Grab Faders 1 and 2

These Level faders control the output level of the Grab scene

ranging from 0 to 100%.

Grab Flash Buttons 1 and 2

These buttons correspond to the Grab faders and act in a similar

way to Preset flash buttons, but will flash the Grab'd scene to the

Add/Solo level.

Decide which Grab fader is to be used to store the new scene.

If the Grab LED to the left of the Grab fader is on, press the button to

clear the fader.

Use the Preset faders, Flash buttons, Chaser, and the other Grab fader

outputs in any combination to generate the scene to be Grab'd.

Press the Grab button to store the current output.

The LED in the Grab button will illuminate to indicate there is a scene

stored in the Grab controls.