Jands Vista S3 설정 매뉴얼 - 페이지 6

{카테고리_이름} Jands Vista S3에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jands Vista S3 8 페이지. Usb consoles
Jands Vista S3에 대해서도 마찬가지입니다: 설정 매뉴얼 (8 페이지)

Setting up and turning on the console – S3, S1, M1

To get your Vista S3, S1, or M1 USB Console going:

USB LED operation – S1

The back panel LED on continuously indicates that the USB link between

the S1 and host computer is complete and ready for transmission. Once

data communication occurs, the LED flashes.

USB LED operation – M1

The back panel LED on continuously indicates that the USB power link

between the M1 and host computer is complete and ready for data

transmission.

Jands USB Console Setup Guide Version 2.0

Connect the Vista S3 or S1 console to any mains supply between 100

and 240VAC.

Connect the USB cable supplied with the console from the input port

on the console (Type B) to an output port (Type A) on your Windows

PC or Macintosh computer.

Connect the dongle to a USB port on either the console or the

computer. Skip this step if your dongle has been fitted to one of the

internal ports.

Turn on the computer.

Install Vista software (see the documentation supplied with the

software).

Turn on the S3 or S1 console. The computer will respond with a

"Found new hardware" dialogue box asking "Can Windows connect to

Windows Update to search for software?" Select "No, not this time"

and click "Next". When the computer displays the "What do you want

the software to do?" Select "Install the software automatically

(Recommended)" and click "Next".

Launch the Vista software.