Lexmark 544dtn - X Color Laser 빠른 참조
{카테고리_이름} Lexmark 544dtn - X Color Laser에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 544dtn - X Color Laser 4 페이지. Enhanced number pad mode
Lexmark 544dtn - X Color Laser에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 팩스 매뉴얼 (4 페이지), 사용자 설명서 (12 페이지)
페이지 인쇄
Quick Reference
Copying
Making copies
Making a quick copy
1
Load an original document faceup, short edge first into the ADF
or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies,
photo paper, or thin media (such as magazine clippings) into the
ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper
guides.
3
From the printer control panel, press
for a black only copy or
for a color copy.
4
If you placed the document on the scanner glass and have
additional pages to copy, then place the next page on the scanner
glass, and then press 1 on the numeric keypad. Otherwise, press
2 on the numeric keypad.
Copying using the ADF
1
Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies,
photo paper, or thin media (such as magazine clippings) into the
ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the printer control panel, press the Copy button, or use the
keypad to enter the number of copies.
4
Change the copy settings as needed.
5
From the printer control panel, press
for a black only copy or
for a color copy.
Copying using the scanner glass
1
Place an original document facedown on the scanner glass in the
upper left corner.
2
From the printer control panel, press the Copy button, or use the
keypad to enter the number of copies.
3
Change the copy settings as needed.
4
From the printer control panel, press
for a black only copy or
for a color copy.
5
Place the next document on the scanner glass, and then press 1
on the numeric keypad. Otherwise, press 2 on the numeric
keypad.
Canceling a copy job
A copy job can be canceled when the document is in the ADF, on the
scanner glass, or while the document is printing. To cancel a copy job:
1
From the printer control, panel press
Stopping appears, followed by Cancel Job.
2
Press
to cancel the job.
Note: If you want to continue to process the job, then press
to continue copying.
Canceling appears.
The printer clears all pages in the ADF or printer and then cancels the
job. Once the job is canceled, the copy screen appears.
E-mailing
Getting ready to e-mail
Setting up the e-mail function
For e-mail to operate, it must be turned on in the printer settings and
have a valid IP address or gateway address. To set up the e-mail
function:
1
Type the printer IP address into the address field of your Web
browser.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the address in the TCP/IP
section.
2
Click Settings.
3
Click E-mail/FTP Settings.
4
Click E-mail Server Setup.
1
5
Change the e-mail settings as needed.
6
Click Submit.
Setting up the address book
1
Type the printer IP address into the address field of your Web
browser.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the address in the TCP/IP
section.
2
Click Settings.
3
Click E-mail/FTP Settings.
4
Click Manage E-mail Shortcuts.
.
5
Change the e-mail settings as needed.
6
Click Submit.
Creating an e-mail shortcut using
the Embedded Web Server
1
Type the printer IP address into the address field of your Web
browser.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the address in the TCP/IP
section.
2
Click Settings.
3
Click Manage Destinations.
Note: You may be asked to enter a password. If you do not have
an ID and password, get one from your system support person.
4
Click E-mail Destination Setup.
5
Type a unique name for the recipient, and then enter the e-mail
address.
Note: If you are entering multiple addresses, separate each
address with a comma (,).
6
Select the scan settings (Format, Content, Color, and Resolution).
7
Enter a shortcut number, and then click Add.
If you enter a number that is already in use, you are prompted to
select another number.