HIKVISION MD5043SD 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} HIKVISION MD5043SD에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION MD5043SD 20 페이지. Mobile video recorder

Steps

1. Go to Configuration → Network → Advanced Settings → Platform Access.

2. Check Enable.

3. Select Platform Access Mode as Ehome Platform.

4. Select Server Address Type.

– When the server is in extranet, and the IP address is dynamic, you can select Domain Name.

– When the server IP address is static, you can select IP Address.

5. Enter Server Address, Server Port, and Device ID.

Server Address

Enter the static IP address of EHome platform.

Server Port

The default value is 7660.

Device ID

The ID of the device registered on the EHome platform. If you leave it empty, you can log in

to the platform with the serial number.

6. Click Save.

Mobile Video Recorder (-SD) Quick Start Guide

Figure 4-2 Configure EHome Platform