HIKVISION N9616I12T 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} HIKVISION N9616I12T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION N9616I12T 17 페이지.
페이지 인쇄5
S E T D A T E A N D T I M E
1.
Go to MENU > SYSTEM CONFIGURATION > GENERAL.
6
S E T U P N E T W O R K A C C E S S
1.
Go to MENU > SYSTEM CONFIGURATION > NETWORK > GENERAL.
2.
Use pull-down Working Mode menu to select "Multi-address."
3.
Use the pull-down Select NIC menu to select the network interface card you want to configure as the
camera LAN ("LAN 1" or "LAN 2").
4.
Use the pull-down Default Route menu to select the NIC that is to connect to the cameras' LAN.
Uncheck the Enable DHCP checkbox.
5.
6.
Set the IPv4 network IP address, subnet mask, and default gateway to match the IP subnet of the
cameras.
Use the pull-down Select NIC menu to select the network interface card you want to configure for the
7.
external computer LAN.
8.
Set the IPv4 network IP address, subnet mask, and default gateway to match the IP subnet of the
external computer LAN.
9.
Change the "Preferred DNS Server" value to 8.8.8.8 (leave Alternate DNS Server blank).
DATE/TIME
Date and time settings
TIME ZONE
Time zone and daylight savings
time settings
ENABLE NTP
Network Time Protocol settings