Lexmark 650dtn - T B/W Laser Printer 문제 해결 매뉴얼 - 페이지 6
{카테고리_이름} Lexmark 650dtn - T B/W Laser Printer에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 650dtn - T B/W Laser Printer 10 페이지. Envelope feeder installation sheet
Lexmark 650dtn - T B/W Laser Printer에 대해서도 마찬가지입니다: 설정 및 설치 (2 페이지), 설치 시트 (1 페이지)
페이지 인쇄
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Size setting
from the Paper menu.
2
Before sending the job to print, specify the correct size
setting:
•
For Windows users, specify the size from Print
Properties.
•
For Macintosh users, specify the size from the Page
Setup dialog.
Paper curl
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
•
For Windows users, specify the type from Print
Properties.
•
For Macintosh users, specify the type from the Print
dialog.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Print irregularities
These are possible solutions. Try one or more of the following:
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO
HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
•
For Windows users, specify the type from Print
Properties.
•
For Macintosh users, specify the type from the Print
dialog.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
T
HE TONER MAY BE LOW
When 88 Cartridge low appears or when the print
becomes faded, replace the print cartridge.
T
HE FUSER MAY BE WORN OR DEFECTIVE
Replace the fuser.
6
Print is too dark
These are possible solutions. Try one or more of the following:
C
,
,
HECK THE DARKNESS
BRIGHTNESS
SETTINGS
The Toner Darkness setting is too dark, the Brightness setting
is too dark, or the Contrast setting is too high.
•
From the printer control panel, change these settings from
the Quality menu.
•
For Windows users, change these settings from Print
Properties.
•
For Macintosh users, change these settings from the Print
dialog and pop-up menus.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
AND CONTRAST