Lexmark 651de - X B/W Laser 문제 해결 매뉴얼 - 페이지 11
{카테고리_이름} Lexmark 651de - X B/W Laser에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 651de - X B/W Laser 13 페이지. Setup sheet
Lexmark 651de - X B/W Laser에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 사용자 설명서 (12 페이지), 정보 매뉴얼 (19 페이지), 설정 시트 (2 페이지)
페이지 인쇄
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
•
For Windows users, specify the type from Print
Properties.
•
For Macintosh users, specify the type from the Print
dialog.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE
Replace the print cartridge.
Solid color pages
These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINT CARTRIDGE IS PROPERLY
INSTALLED
Remove the print cartridge and shake it from side to side to
redistribute the toner, and then reinstall it.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE OR LOW ON
TONER
Replace the used print cartridge with a new one. If the problem
continues, the printer may need to be serviced. For more
information, contact Customer Support.
Streaked vertical lines
These are possible solutions. Try one or more of the following:
T
HE TONER IS SMEARED
Select another tray or feeder to feed paper for the job:
•
From the printer control panel, select the Default Source
from the Paper Menu.
•
For Windows users, select the paper source from Print
Properties.
•
For Macintosh users, select the paper source from the Print
dialog and pop-up menus.
T
HE PRINT CARTRIDGE IS DEFECTIVE
Replace the print cartridge.
T
HE PAPER PATH MAY NOT BE CLEAR
Check the paper path around the print cartridge.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Clear any paper you see.
T
HERE IS TONER IN THE PAPER PATH
Contact Customer Support.
11
Toner fog or background shading
appears on the page
These are possible solutions. Try one or more of the following:
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE
Replace the print cartridge.
T
HE CHARGE ROLLS MAY BE DEFECTIVE
Replace the charge rolls.
T
HERE IS TONER IN THE PAPER PATH
Contact Customer Support.
Toner rubs off
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
•
For Windows users, specify the type from Print
Properties.
•
For Macintosh users, specify the type from the Print
dialog.