Lexmark 652de - X MFP B/W Laser 매뉴얼
{카테고리_이름} Lexmark 652de - X MFP B/W Laser에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 652de - X MFP B/W Laser 6 페이지. Setup sheet
Lexmark 652de - X MFP B/W Laser에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (13 페이지), 사용자 설명서 (12 페이지), 정보 매뉴얼 (19 페이지), 설정 시트 (2 페이지)
페이지 인쇄
Lexmark™ X65x
Clearing Jams Guide
Clearing jams
Avoiding jams
The following hints can help you avoid jams.
Paper tray recommendations
•
Make sure the paper lies flat in the tray.
•
Do not remove trays while the printer is printing.
•
Do not load trays, the multipurpose feeder, or the envelope
feeder while the printer is printing. Load them prior to printing,
or wait for a prompt to load them.
•
Do not load too much paper. Make sure the stack height does
not exceed the indicated maximum height.
•
Make sure the guides in the paper trays, multipurpose feeder,
or envelope feeder are properly positioned and are not
pressing too tightly against the paper or envelopes.
•
Push all trays in firmly after loading paper.
Paper recommendations
•
Use only recommended paper or specialty media.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same stack.
•
Make sure all sizes and types are set correctly in the printer
control panel menus.
•
Store paper per the manufacturer's recommendations.
Envelope recommendations
•
To reduce wrinkling, use the Envelope Enhance menu in the
Paper menu.
•
Do not feed envelopes that:
–
Have excessive curl or twist
–
Have windows, holes, perforations, cutouts, or embossing
–
Have metal clasps, string ties, or folding bars
–
Have an interlocking design
–
Have postage stamps attached
–
Have any exposed adhesive when the flap is in the sealed
or closed position
–
Have bent corners
–
Have rough, cockle, or laid finishes
–
Are stuck together or damaged in any way
Understanding jam numbers
and locations
When a jam occurs, a message indicating the jam location appears.
Open doors and covers and remove trays to access jam locations.
To resolve any paper jam message, you must clear all jammed
paper from the paper path.
The following table lists the jams that can occur and the location
of each jam:
1
Jam numbers Area
1
200–202
Printer
2
230–239
Duplex unit
3
240–249
Paper tray
4
250
Multipurpose feeder
5
260
Envelope feeder
6
270–279
Optional output bin
7
280–282
Finisher
8
283
Stapler
9
290–294
ADF cover
200 and 201 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
Lower the multipurpose feeder door.