Lexmark 654de - X B/W Laser 매뉴얼 - 페이지 2

{카테고리_이름} Lexmark 654de - X B/W Laser에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 654de - X B/W Laser 6 페이지. Setup sheet
Lexmark 654de - X B/W Laser에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (13 페이지), 사용자 설명서 (12 페이지), 정보 매뉴얼 (19 페이지), 설정 시트 (2 페이지)

페이지 인쇄
Lexmark 654de - X B/W Laser 매뉴얼
3
Push the release latch, and then open the front cover.
4
Lift and pull the print cartridge out of the printer.
Warning—Potential Damage: Do not touch the
photoconductor drum on the underside of the cartridge. Use
the cartridge handle whenever you are holding the cartridge.
5
Place the print cartridge aside.
Warning—Potential Damage: Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage: The jammed paper may be
covered with unfused toner which can stain garments and
skin.
6
Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Note: If the paper is not easy to remove, then open the rear
door and remove the paper from there.
7
Align and reinstall the print cartridge.
8
Close the front cover.
9
Close the multipurpose feeder door.
10
Touch Continue.
2

202 paper jam

Touch Status/Supplies to identify the location of the jam. If the
paper is exiting the printer, then pull the paper out, and then touch
Continue.
If the paper is not exiting the printer:
1
Pull down the top rear door.
2
Remove the jammed paper.
3
Close the top rear door.
4
Touch Continue.
230–239 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
Pull the standard tray out.