Lexmark 656de - X B/W Laser 문제 해결 매뉴얼 - 페이지 10

{카테고리_이름} Lexmark 656de - X B/W Laser에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 656de - X B/W Laser 13 페이지. Setup sheet
Lexmark 656de - X B/W Laser에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 사용자 설명서 (12 페이지), 정보 매뉴얼 (19 페이지), 설정 시트 (2 페이지)

페이지 인쇄
Lexmark 656de - X B/W Laser 문제 해결 매뉴얼

Solid black or white streaks

These are possible solutions. Try one or more of the following:
M
AKE SURE THE FILL PATTERN IS CORRECT
If the fill pattern is incorrect, then choose a different fill pattern
from your software program or application.
C
HECK THE PAPER TYPE
•
Try a different type of paper.
•
Use only transparencies recommended by the printer
manufacturer.
•
Make sure the Paper Type and Paper Texture settings match
the paper loaded in the tray or feeder.
M
AKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE
PRINT CARTRIDGE
Remove the print cartridge and shake it from side to side to
redistribute the toner, and then reinstall it.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE OR LOW ON
TONER
Replace the used print cartridge with a new one.

Print is too light

These are possible solutions. Try one or more of the following:
C
,
,
HECK THE DARKNESS
BRIGHTNESS
SETTINGS
The Toner Darkness setting is too light, the Brightness setting
is too light, or the Contrast setting is too low.
•
From the printer control panel, change these settings from
the Quality menu.
•
For Windows users, change these settings from Print
Properties.
•
For Macintosh users, change these settings from the Print
dialog and pop-up menus.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
10
•
•
T
HE TONER IS LOW
When 88 Cartridge Low appears, order a new print
cartridge.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE
Replace the print cartridge.

Print is too dark

AND CONTRAST
These are possible solutions. Try one or more of the following:
C
HECK THE DARKNESS
SETTINGS
The Toner Darkness setting is too dark, the Brightness setting
is too dark, or the Contrast setting is too high.
•
From the printer control panel, change these settings from
the Quality menu.
•
For Windows users, change these settings from Print
Properties.
•
For Macintosh users, change these settings from the Print
dialog and pop-up menus.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
For Windows users, specify the type from Print
Properties.
For Macintosh users, specify the type from the Print
dialog.
,
,
BRIGHTNESS
AND CONTRAST