Lexmark 658de - X MFP B/W Laser 매뉴얼 - 페이지 4
{카테고리_이름} Lexmark 658de - X MFP B/W Laser에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 658de - X MFP B/W Laser 6 페이지. Setup sheet
Lexmark 658de - X MFP B/W Laser에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (13 페이지), 사용자 설명서 (12 페이지), 정보 매뉴얼 (19 페이지), 설정 시트 (2 페이지)
페이지 인쇄
5
Slide the paper guide toward the inside of the tray until it
lightly rests against the edge of the paper.
6
Touch Continue.
260 paper jam
Touch Status/Supplies to identify the location of the jam. The
envelope feeder feeds envelopes from the bottom of the stack;
the bottom envelope will be the one that is jammed.
1
Lift the envelope weight.
2
Remove all envelopes.
3
If the jammed envelope has entered the printer and cannot be
pulled out, then lift the envelope feeder up and then out of the
printer, and then set it aside.
4
Remove the envelope from the printer.
Note: If you cannot remove the envelope, then the print
cartridge will have to be removed. For more information, see
"200 and 201 paper jams" on page 1.
5
Reinstall the envelope feeder. Make sure it snaps into place.
6
Flex and stack the envelopes.
7
Load the envelopes in the envelope feeder.
8
Adjust the paper guide.
9
Lower the envelope weight.
10
Touch Continue.
270–279 paper jams
To clear a jam in the high-capacity output stacker or the 4-bin
mailbox:
1
Touch Status/Supplies to identify the location of the jam.
2
If the paper is exiting into a bin, then pull the paper straight
out, and then touch Continue.
If not, then continue with step 3.
3
Pull down the output bin door or doors.
4
Remove the jammed paper.
5
Close the output bin door or doors.
6
Touch Continue.
280–282 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
TM
Pull down the StapleSmart
finisher door.
3
Remove the jammed paper.
4
Close the StapleSmart finisher door.
5
Touch Continue.
4
283 staple jams
1
Touch Status/Supplies to identify the location of the jam.
2
Press the latch to open the stapler door.