Lexmark 736de - X Color Laser 빠른 참조 매뉴얼 - 페이지 4

{카테고리_이름} Lexmark 736de - X Color Laser에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 736de - X Color Laser 4 페이지. Information guide
Lexmark 736de - X Color Laser에 대해서도 마찬가지입니다: 팩스 매뉴얼 (4 페이지), 매뉴얼 복사 (4 페이지), 이메일 매뉴얼 (3 페이지), 팩스 매뉴얼 (3 페이지), Ftp 매뉴얼 (3 페이지), 설치 (2 페이지), 정보 매뉴얼 (1 페이지)

페이지 인쇄
Lexmark 736de - X Color Laser 빠른 참조 매뉴얼
Scanning to a computer or

flash drive

Scanning to a computer

1
Type the printer IP address into the address field of your Web
browser.
Note: If you do not know the IP address of the printer, then
print a network setup page and locate the IP address in the
TCP/IP section.
2
Click Scan Profile.
3
Click Create.
4
Select your scan settings, and then click Next.
5
Select a location on your computer where you want to save
the scanned output file.
6
Enter a scan name.
The scan name is the name that appears in the Scan Profile list
on the display.
7
Click Submit.
8
Review the instructions on the Scan Profile screen.
A shortcut number was automatically assigned when you
clicked Submit. You can use this shortcut number when you
are ready to scan your documents.
a
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on
the scanner glass.
b
If you are loading a document into the ADF, then adjust the
paper guides.
c
Press
, and then enter the shortcut number using the
keypad, or touch Held Jobs on the home screen, and then
touch Profiles.
d
After you enter the shortcut number, the scanner scans and
sends the document to the directory or program you
specified. If you touched Profiles on the home screen, then
locate your shortcut on the list.
9
Return to the computer to view the file.
The output file is saved in the location you specified or
launched in the program you specified.
Scanning to a flash drive
1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the
paper guides.
3
Insert the flash drive into the USB port on the front of the
printer.
The Held Jobs screen appears.
4
Touch Scan to USB drive.
5
Select the scan settings.
6
Touch Scan It.
4