Avastor XD5 사용자 설명서 - 페이지 6

{카테고리_이름} Avastor XD5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avastor XD5 19 페이지. Desktop raid

CONNECTING TO A COMPUTER

CONNECTING THE XD5

1. Check the Voltage Selector Switch for proper setting. Connect the AC Power

Cord to the XD5.

2. Insert the USB 3.0, eSATA, FireWire 800 or 400 cable into the corresponding

port of the XD5 and the host computer.

NOTE: The XD5 should only be connected to a host computer via one type of

data cable. Connecting the XD5 to a computer simultaneously via two or

more data cables is not recommended and can cause data loss.

3. Press the Power Switch to turn on the XD5.

4. When powered on, the disk LED lights (blue) will illuminate when the drives

are detected and powered on.

5. You are now ready to begin using your XD5.

VER 1.0