HIKVISION DS-3WF03C 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} HIKVISION DS-3WF03C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-3WF03C 16 페이지.

192.168.1.X, X is any integer from 2 to 253, and the address is not used. The subnet mask can be

used by default. Click "Next" when finished.

Step 3 Go to the "Wireless" page. The device can modify the wireless parameters such as network

name, frequency, and key through this page. The default wireless mode of the device is the Station.

The default network name of the device is Wireless. When pairing with the Access Point device,

please note that the key and the SSID on the Station side must be the same as the Access Point.

Other configurations are recommended to keep the default values. Click "Next".

Step 4 Go to the Setup "Wizard – Finish" page and click "Change" to save the configuration.

Users can also click the "Wireless" bar at the top of the page to enter the "Wireless" page and

modify the network name, frequency, key and other parameters.

DS-3WF03C Quick Start Guide

Figure 4-2 Wizard – Network

Figure 4-3 Wizard – Wireless

Figure 4-4 Wizard – Finish