HIKVISION DS-7104HQHI-K1 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} HIKVISION DS-7104HQHI-K1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7104HQHI-K1 17 페이지. Network/digital video recorder
HIKVISION DS-7104HQHI-K1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

Fix-on-Bottom Installation

Fix-on-bottom installation is applicable when it requires to install the HDD at the internal bottom.

Unfasten screws on each panel to remove the device cover. Refer to Figure 2-7.

Connect the data cable and power cable. Refer to Figure 2-8.

Match HDD screw threads with the reserved holes on the device bottom, and fix HDD with screws. Refer

to Figure 2-9.

You can repeat the steps above to install other HDDs.

Reinstall the device cover and fasten screws.

RS-485 and Controller Connection

Use RS- 485 interface to connect PTZ with DVR.

Before you start

Ensure both controller and DVR are grounded.

Pull out the pluggable block at the RS-485 terminal block.

Press and hold the orange part of the pluggable block, insert signal cables into slots.

Release the orange part. Ensure signal cables are in tight.

Connect A+ on PTZ to D+ on terminal block and B- on controller to D- on terminal block. Fasten stop

screws.

Plug pluggable block back into terminal block.

Digital Video Recorder Quick Start Guide

Fix Mounting Ear

Remove Cover

Open Front Panel

Connect Cable

Insert HDD

Fix HDD