Lexmark 840n - W B/W Laser Printer 연결 매뉴얼
{카테고리_이름} Lexmark 840n - W B/W Laser Printer에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 840n - W B/W Laser Printer 19 페이지. Troubleshooting guide
Lexmark 840n - W B/W Laser Printer에 대해서도 마찬가지입니다: 설정 (4 페이지), 문제 해결 매뉴얼 (6 페이지)
페이지 인쇄
Connection Guide
Note: For local printing, you must install the printer software (drivers) before connecting the USB cable.
Installing printer and software for local printing using Windows
1 Launch the drivers CD that shipped with the printer.
2 Click Install Printer and Software.
Note: Some Windows operating systems require that you have administrative access to install printer
software (drivers) on the computer.
3 Click Agree to accept the license agreement.
4 Select Suggested, and then click Next.
The Suggested option is the default installation for local setup. If you need to install utilities, change
settings, or customize device drivers, select Custom. Follow the instructions on the computer screen.
5 Select Local Attach, and click Finish.
Note: It may take a few minutes for the drivers to completely load.
6 Close the drivers CD installer application.
7 Connect the USB cable. Be sure to match the USB symbol on the cable to the USB symbol on the printer.
Note: Only Windows 98 SE, Windows Me, Windows 2000, Windows XP, and Windows Server 2003
operating systems support USB connections. Some UNIX, Linux, and Macintosh computers also
support USB connections. See the computer operating system documentation to see if your system
supports USB.
8 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a
properly grounded outlet.
9 Turn on the printer.
Plugging in the USB cable and turning on the printer prompts the Windows operating system to run the plug
and play screens to install the printer as a new hardware device. The installation of printer software (drivers)
done in step 1 should satisfy the plug and play requirements. When plug and play is finished, a printer
object will appear in your Printers folder.
Note: After the printer completes its internal tests, the Ready message indicates that the printer is ready
to receive jobs. If you see a message other than Ready on the display, see the publications CD for
instructions on clearing the message.
10 Send a test page to print.
Using a parallel or serial cable
For detailed instructions, see the User Guide on the publications CD that shipped with the printer.
Local printing with Mac or UNIX/Linux
For detailed instructions, see the User Guide on the Publications CD that shipped with the printer.
Connection Guide
Page 1 of 2