Garden Treasures APQ08615 조립 설명서 - 페이지 4

{카테고리_이름} Garden Treasures APQ08615에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Treasures APQ08615 6 페이지. Side table

ASSEMBLY INSTRUCTIONS
1.
Place the table rim (A) upside down on a flat, non-
abrasive surface. Attach a table leg (C) to the table
rim by using a 1/4 in. x 20 mm bolt (AA) and washer
(CC). Guide the bolt through the hole in the table leg
and into the pre-drilled hole in the table rim. Hand
tighten only. Repeat for the other three legs.
Hardware Used
AA
1/4 in. x 20 mm Bolt
CC
ø 6.5 x 1.0 mm Washer
2 . Attach the leg connector bracket (B) to a leg by
using two 1/4 in. x 30 mm bolts (BB) and washers
(CC). Guide the bolts through the holes in the table
leg and into the pre-drilled holes in the table rim.
Hand tighten only. Repeat for the other three legs.
Hardware Used
BB
1/4 in. x 30 mm Bolt
CC
ø 6.5 x 1.0 mm Washer
3.
Tighten all bolts using hex bolt driver (EE). Important
note: Tighten each bolt a few revolutions at a time.
We recommend working in a cross corner (X)
fashion, alternating between bolts. This will tighten
the frame evenly by placing equal pressure on all
bolt joints. Do not over tighten. Cover all bolts with
covers (DD) provided.
Hardware Used
Bolt Cover
DD
4.
With the help of another person, carefully turn the
table in the upright position. Your table is now
ready for usse.
x 4
x 4
x 8
x 8
3
x 12
Lowes.com/gardentreasures
4