HIKVISION DS-7104NI-SL 빠른 작동 매뉴얼 - 페이지 15

{카테고리_이름} HIKVISION DS-7104NI-SL에 대한 빠른 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7104NI-SL 20 페이지. Hikvision ds-7100ni-sl series nvr quick operation guide
HIKVISION DS-7104NI-SL에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄

Quick Operation Guide of DS-7100NI-SL Series NVR

basic setting of the IP cameras.

Steps:

Click the

icon in the camera management interface to edit the parameters; you can edit the IP address,

protocol and other parameters.

Click OK to save the settings and exit the editing interface.

Record Settings

Before you start:

Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to

the user manual for detailed information.

Purpose:

Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.

And for other record types, you may refer to the user manual for detailed information.

Note:

After rebooting all the manual records enabled are canceled.

Instant Record

On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the

window when you click on it.

Click the

icon to enable the record, and the icon turns to

then the icon turns to

All-day Record

Perform the following steps to set the all-day recording.

On the live view window, right-click the window and move the cursor to the Start Recording option, and select

Continuous Record or Motion Detection Record on your demand.

. And click

icon to disable the record,