Lexmark 935dtn - C Color Laser Printer 문제 해결 매뉴얼 - 페이지 5
{카테고리_이름} Lexmark 935dtn - C Color Laser Printer에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 935dtn - C Color Laser Printer 11 페이지. Troubleshooting guide
Lexmark 935dtn - C Color Laser Printer에 대해서도 마찬가지입니다: 연결 매뉴얼 (6 페이지), 인쇄 매뉴얼 (4 페이지), 미디어 매뉴얼 (3 페이지)
페이지 인쇄
Solving print quality problems
The information in the following topics may help you solve print
quality problems. If these suggestions do not correct the problem,
contact Customer Support. You may have a printer part that
requires adjustment or replacement.
Isolating print quality problems
To help isolate print quality problems, print the print quality test
pages:
1
Turn the printer off.
2
Load letter- or A4-size paper in the tray in the long-edge
orientation.
3
From the control panel, press and hold
the printer on.
4
Release both buttons when Performing Self Test
appears.
The printer performs its power-on sequence, and then
Config Menu appears.
5
Press
until
Prt Quality Pgs appears, and then
press
.
The pages are formatted. Printing Quality Test
Pages appears, and then the pages print. The message
remains on the display until all the pages print.
6
After the print quality test pages print, press
Config Menu appears, and then press
Blank pages
The printer may need to be serviced. For more information,
contact Customer Support.
Characters have jagged or uneven
edges
and
while turning
If you are using downloaded fonts, verify that the fonts are
supported by the printer, the host computer, and the software
program.
Clipped images
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the
paper size loaded.
C
HECK THE
until
Exit
Make sure the Paper Size setting matches the paper loaded in
.
the tray.
P
S
APER
IZE SETTING
5
Dark lines
One or more of the photoconductors may be defective.
If an 84 Color pc unit life warning, 84 Black pc
unit life warning, 84 Replace color pc units, or
84 Replace black pc unit message appears, replace the
photoconductor(s).
Gray background
R
T
D
EDUCE THE
ONER
ARKNESS SETTING
From Print Properties, select a different Toner Darkness setting
before sending the job to print.