Avatar Technologies VS-441S 운영 매뉴얼 - 페이지 3

{카테고리_이름} Avatar Technologies VS-441S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avatar Technologies VS-441S 9 페이지. Hdmi 4x1 quad multi-viewer with seamless switcher

페이지 인쇄

Chassis Material

Silkscreen Color

Operating Temperature 0 °C~40 °C/ 32 °F~104 °F

Storage Temperature

Relative Humidity

Power Consumption

5. Operation and Fuctions

5.1 Front panel

1. ON/OFF: Power on/off switch.

2. SERVICE: For factory use only.

3. IR : Remote control receiver window.

4. POWER LED: This red LED illuminates when the device is connected with

power supply.

5. IN1,2,3,4 LED: These red LED illuminates when the output select to the

corresponding input.

6. INPUT BUTTON: Press this button to select the input source.

7. MODE BUTTON: Press this button to select the multi-view display mode.

※see the detail description below(chapter 5.7).

8. RESO BUTTON: Press this button to select the HDMI output resolution.

5.2 Rear panel (Basic Version)

1. Input: These slot is where you connect the HDMI source output from DVD,

PS3,Set-top Box and Note Book.

2. OUTPUT: The HDMI is where you connect the HDTV or monitor with HDMI

cable for input source display.The Coax is where you connect to the amplifier with

coaxial cable.

3. IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote

being used is within the direct line-of-sight of the IR receiver.

4. IR TX: Connect the IR Blaster cable included in the package for IR signal

transmission. Pace the IR blaster in direct line-of-sight of the equipment to be

controlled.

Metal

Black

−20 °C ~ 60 °C/−4 °F ~140 °F

20~90 % RH (non-condensing)

10 W