Makita HM1801 사용 설명서 - 페이지 5

{카테고리_이름} Makita HM1801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita HM1801 12 페이지. Electric breaker
Makita HM1801에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 사용 설명서 (8 페이지), 사용 설명서 (20 페이지), 사용 설명서 (12 페이지), 사용 설명서 (8 페이지), 기술 정보 (18 페이지)

페이지 인쇄

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained from repeated use)

replace strict adherence to hammer safety rules. If you use this tool unsafely

or incorrectly, you can suffer serious personal injury.

Wear ear protectors. Exposure to noise can cause

hearing loss.

Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Hold tools by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring or its own cord. Con-

tact with a "live" wire will make exposed metal parts

of the tool "live" and shock the operator.

Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly

padded gloves.

Be sure the bit is secured in place before opera-

tion.

Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual

may cause serious personal injury.

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Do not operate the tool at no-load unnecessar-

ily.

15. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

GEB004-2