Empire Comfort Systems Boulevard VFLB72FP90N-1 주택 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Empire Comfort Systems Boulevard VFLB72FP90N-1에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Empire Comfort Systems Boulevard VFLB72FP90N-1 12 페이지. Contemporary linear vent-free gas fireplace models
LEd ANd FIREPLACE WALL CONTROLS
LEd BRIGHTNESS BUTTON
Press the LED Brightness Button to activate the LED lights and
to switch the LED Intensity to High, Medium, Low or Off.
1 – On – High
2 – Medium
3 – Low
4 – Off
Use the Brightness Button in conjunction with the Mode Button to
create unique looks.
Lights will remember the last Mode when turned on again. (After
a power failure, you must reset the lights to the desired Mode.)
Turn off the LED Lights when not in use.
LEd MOdE BUTTON
Press the Mode Button to switch LED light system from
Automatic Color Changes to Individual Colors.
1 – Auto-cycle – Rapid
2 – Auto-cycle – Gradual
3 – Pause Auto-cycle
4 – Deep Blue
5 – Royal Violet
6 – Cardinal Red
7 – Sea Green
8 – Forest Green
9 – Tranquil Blue
10 – White
The transmitter and receiver are radio frequency devices.
Placing the receiver in or near metal may severely reduce
the signal range.
Notice:
•
Turn OFF the main gas supply of the fireplace during
installation or maintenance of the receiver.
•
Place the receiver's 3-position slider switch in the OFF
position during installation or maintenance.
Fire Hazard. The receiver lights the fireplace, which can
turn on suddenly. Keep away from the fireplace burner
when operating the remote system or activating manual
bypass of the remote system.
Property damage Hazard. Excessive heat can cause property
damage. The fireplace can stay lit for many hours. Turn off
the fireplace if it is not going to be attended for any length
of time.
Always place the Transmitter where children can not reach it.
Page 6
USING THE REMOTE CONTROL
CAUTION
WARNING
WARNING
WARNING
REMOTE
RECEIVER
SWITCH
- ON
- REMOTE
- OFF
TRANSMITTER (REMOTE CONTROL WITH LCd dISPLAY)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display. See Figure 6.
The Transmitter is powered by 3 AAA type batteries. A Mode
Button is provided to Index between the features and a
Thermostat Button is used to turn on/off or index through
thermostat functions. See Figures 6 and 7.
Figure 6 - Proflame Transmitter (Remote Control)
Figure 7 - Transmitter LCD display
LED
BRIGHTNESS
BUTTON
- High
- Medium
- Low
- OFF
LED MODE
BUTTON
Figure 5
Blue LCD Display
ON/OFF Button
THERMOSTAT Button
UP/DOWN Arrow Button
MODE Button
40390-0-0119