Avaya 1100 Series 소프트웨어 사용 설명서 - 페이지 16

{카테고리_이름} Avaya 1100 Series에 대한 소프트웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 1100 Series 20 페이지. Expansion module for sip

Setup and assembly

Figure 3: Connecting the Expansion Module

4. If connecting a second, or a third Expansion Module, repeat steps 2

to 4.

Note: The second Expansion Module is attached to the right side of

the first Expansion Module. The third Expansion Module is attached

to the right side of the second Expansion Module.

5. Adjust the height of the IP Deskphone tilt adjustment to a comfortable

viewing angle. Then adjust each of the Expansion Module footstands

so they are flush to the desk surface. Turn the wheel on the back right

side of the Expansion Module to the right (if viewed from the front) to

tighten the Expansion Module.

WARNING

Do not over tighten the wheel on the Expansion Module.

Connect power to the IP Deskphone. The Expansion Module powers up.

Note: The Expansion Module uses the electrical connection of the

IP Deskphone for power. It does not have its own power source.