Avaya 1120E 구성 매뉴얼 - 페이지 13

{카테고리_이름} Avaya 1120E에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 1120E 16 페이지. Ip deskphone with sip software quick
Avaya 1120E에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지), 시작하기 (2 페이지), 빠른 참조 카드 (2 페이지), 참조 매뉴얼 (3 페이지)

페이지 인쇄

To configure the setting on the phone, press the Services or "Globe" button twice. The phone

will ask for an Admin password. Enter the proper credentials.

Select Server Settings and enter the following:

 Domain Name: Enter the domain name configured in Section 3.4. For the sample

configuration, avaya.com was used.

 S1: Enter the IP address configured in Section 3.2. For the sample configuration

33.1.1.104 was used.

 TCP Port: Enter 5060.

 S2: Enter the IP address configured in Section 3.2.

 TCP Port: Enter 5060.

 Retain default for all other values.

 Select Apply.

Select Device Settings and enter the following:

 EAP Mode: Disable

 DHCP: No

 Phone IP: Enter the IP address configured in Section 3.6.

 Net Mask: Enter the appropriate value. For the sample configuration

255.255.255.0 was used.

 Gateway: Enter the appropriate value. For the sample configuration 33.1.1.254

was used.

 DNS1 IP: Enter the appropriate value. For the sample configuration 30.1.1.7 was

used.

 DNS2 IP: Enter the appropriate value. For the sample configuration 30.1.1.7 was

used.

 Provisioning Server URL: Enter the IP address configured in Section 3.2. For

the sample configuration 33.1.1.104 was used.

 Protocol: HTTP

 Retain default for all other values.

 Select Apply.

 The telephone will reboot upon selecting Apply. It will automatically upgrade the

firmware version (if needed). After that, the telephone will provide the user with

a login prompt.

 Enter the login and password configured in Section 3.7.

PV; Reviewed:

SPOC 2/1/2011

Solution & Interoperability Test Lab Application Notes

13 of 16

11-12-R4-IPO61