Jandy Infinite WaterColors IWCP50W100 설치 및 운영 매뉴얼 - 페이지 10
{카테고리_이름} Jandy Infinite WaterColors IWCP50W100에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Infinite WaterColors IWCP50W100 12 페이지. Led lighting
Jandy Infinite WaterColors IWCP50W100에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
ENGLISH
Section 6. Amazon Alexa Light Control
Go to iaqualink.com for more information on controlling your Infinite WaterColors lights through Amazon Alexa.
Section 7. Troubleshooting
Problem
Light don't turn on
Lights are flashing yellow
Lights are on, but not switching to the
selected color
Some of my lights come on, but not
others
Page 10
Jandy
Infinite WaterColors
®
Possible Cause
Light Controller is not powered
Light Controller is not communicating to
automation
Lights are not powered
Lights has failed
Lights are powered but not
communicating to the Light Controller
Non-compatible lights are connected
Lights are in a different zone than the
one being switched
Lights are in separate zones
|
LED Light Controller
Installation & Operation Manual
™
Corrective Action
Check supply power, LED2 should be on.
Check that RS4-85 is connected, LED1
should be blinking.
Check that the light is wired to the Light
Controller output.
Replace the light or swap the PCBA
(for niched pool and spa LED lights only).
Check that lights are wired to the Light
Controller. Other transformers are not
compatible.
Check that Infinite WaterColors Lights
are connected. Other lights are not
compatible.
Ensure lights are in the zone selected.
Ensure lights are in the zone selected.