Jandy Infinite WaterColors IWCP50W100 설치 및 운영 매뉴얼 - 페이지 3
{카테고리_이름} Jandy Infinite WaterColors IWCP50W100에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Infinite WaterColors IWCP50W100 12 페이지. Led lighting
Jandy Infinite WaterColors IWCP50W100에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
Jandy
Infinite WaterColors
®
Section 1. Safety Information
IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS
The Jandy Infinite WaterColors Pool & Spa Lights are designed to be powered and operated with the Jandy Infinite
WaterColors LED Light Controller, the lights will not operate when powered from an alternate transformer. Follow
all installation and operating instructions that accompany this product, as well as the Jandy Infinite WaterColors LED
Light Controller (Model: IWCLC300W).
When installing and using this electrical equipment, basic safety precautions should always be followed, including the
following:
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION.
licensed or certified electrician in accordance with the National Electrical Code
ordinances. In Canada, the Canadian Electrical Code and all applicable local codes and ordinances must be
adhered to. Improper installation will create an electrical hazard, which may result in death or serious injury to pool
or spa users, installers, or others due to electrical shock, and may also cause damage to property. Read and follow
the specific instructions below.
Before installing this underwater light, read and follow all warning notices and instructions accompanying this light.
Failure to follow safety warnings and instructions can result in severe injury, death, or property damage.
Visit www.zodiacpoolsystems.com for additional free copies of these instructions or call Zodiac Technical Support at
800.822.7933 (U.S.) or 888.647.4004 (Canada)
Except when the Jandy Infinite WaterColors LED Lights are installed in an area of the swimming pool that is not
used for swimming and the lens is adequately guarded to keep any person from contacting it, the light shall be
installed in or on a wall of the pool, with the top of the lens opening not less than 18 inches (457 mm) below the
normal water level of the pool.
This manual contains important information about the installation, operation and safe use of this
product. This information should be given to the owner/operator of this equipment.
The Jandy Infinite WaterColors LED Lights are intended for installation in fresh water and salt water swimming
pools. It is important to ensure that the wet niches in which the lights are installed are intended for their appropriate
application, either fresh water or salt water pools.
|
Pool & Spa LED Lights
Installation and Operation Manual
™
READ AND FOLLOW ALL INSTRUCTIONS
WARNING
WARNING
CAUTION
ATTENTION INSTALLER
NOTICE
SAVE THESE INSTRUCTIONS
This underwater light must be installed by a
and applicable local codes and
®
ENGLISH
Page 3