Jandy Jandy Pro Series 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Jandy Jandy Pro Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Jandy Pro Series 12 페이지. Single element cartridge pool & spa cs filters
Jandy Jandy Pro Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 및 운영 매뉴얼 (20 페이지), 설치 지침 (2 페이지), 설치 및 운영 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (16 페이지)

Nicheless Underwater LED Lights | Owner's Manual

Figure 3.

Attach the assembled light and cable to the docking ring

Section 3.

Pro Series Nicheless LED Lights

NOTE The Jandy Pro Series Nicheless LED Lights are not compatible

with light dimmers. Do not wire the Jandy Pro Series Nicheless

Lights to any dimming circuitry.

To the extent allowed by local installation codes in effect in the installation

jurisdiction and capacity of the electrical equipment, multiple Jandy Pro

Series lights may be controlled with a single switch and transformer so

their colors may be synchronized.

Separate switches may be used to control the on/off and color functions

of each set of Jandy Pro Series Nicheless Lights (a 'set' being all the

lights wired to a common 12 VAC transformer). It is recommended that

these switches be located next to each other to facilitate simple color

synchronization when desired. If color synchronization is critical, switches

must be operated simultaneously.

3.1

Wiring to an AquaLink

The Jandy Pro Series Nicheless LED Lights can be controlled by an

AquaLink controller. Connect the transformer powering the lights to one

of the auxiliary relays in the AquaLink.

Refer to Figure 4 to connect the Jandy Pro Series Nicheless LED Lights to

the Power Center.

Wiring Options for Controlling Jandy

ENGLISH

Controller

Page 7