Jandy Jandy Pro Series 매뉴얼 - 페이지 7

{카테고리_이름} Jandy Jandy Pro Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jandy Jandy Pro Series 8 페이지. Single element cartridge pool & spa cs filters
Jandy Jandy Pro Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 및 운영 매뉴얼 (20 페이지), 설치 지침 (2 페이지), 설치 및 운영 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (16 페이지)

G. Testing the Connection

Once the power pack has been wired to the AquaLink

RS Control System or PDA, follow these steps to test

the connection:

1. Apply power to the power pack and the AquaLink

RS Control System or PDA.

2. Wait about 20 seconds. If the connection was

successful, a Ŧ symbol will appear in the top right

corner of the power pack display.

NOTE If the power pack does not connect to the

controller, turn the power off to both devices

and repeat steps 1 and 2. If the power pack

still does not connect to the controller, re-check

the wiring connections (see Figure 10) and the

controller setting on the power pack

(see Section 4.D).

The following table is for your reference. To order

additional parts, please contact your local Jandy

Distributor.

Description

Power PCB Assembly

Controller PCB Assembly

Output Cable Assembly

Power Pack Covers

Control PCB Mounting Screws

Power Supply Cover Screws

Jandy

Pro Series AquaPure

Ei™ Series

Replacement Kit Instructions

Page 7