HIKVISION DS-7600NI-SE 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-7600NI-SE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7600NI-SE 13 페이지. Ds-7600ni-se/p series nvr

10. Adding IP Cameras

Adding IP Cameras

The DS-7600NI-SE/P series NVR provides PoE interfaces which can connect to IP cameras directly. The

PoE interface supports Plug-and-Play function. You can also connect to the online IP camera manually.

Plug-and-Play:

1. Connect the IP cameras via PoE interfaces.

2. Enter the Cameras menu by going to Main Menu > Cameras Setup > Cameras. You can see the

connected cameras with assigned IP address are listed.

Note: 1) For HIKVISION IP camera, to use Plug-and Play, user just need to plug the camera. 2) For

third-party IP camera, please make sure it supports ONVIF protocol, SADP search of ONVIF. Also, user

name and password should be admin/12345, IP address should be in the same segment of POE switch

NIC IP address(192.168.254.1 is default IP address).

Manual:

1. Enter the Cameras menu by going to Main Menu > Cameras Setup > Cameras.

2. Click the Search button to automatically detect connected IP cameras on the network.

3. You can modify the camera's IP, subnet and port settings by clicking on the

camera's IP address.

4. Click

on added camera list and change the Adding Method from Plug-and-Play to Manual.

5. Input the necessary information like IP address, password and so on for the camera that you want

to connect. Click Apply to confirm adding the camera and click OK to return to the previous menu.

Please note the camera's status will show as disconnected initially. Click the Refresh button to obtain

a connected status. You can also click the play icon to verify a successful connection to the camera.

6. Go to Main Menu > Recording Configuration > Parameters to setup IP camera recording resolution,

frame rate, etc.

Network Video Recorder

next to the