Garden Wood Furniture Chelsea 85992KFRS1 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Garden Wood Furniture Chelsea 85992KFRS1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Wood Furniture Chelsea 85992KFRS1 6 페이지. Bench

1) Glue three 10x40mm Wood Dowels (C) into the upper holes in the Left Leg Assembly (1) and

one 8x30mm Wood Dowel (D) in each end of Seat Brace (6) as shown in FIGURE 1. Attach

the Back (3), with the dowel hole in lower rail to the front, to the leg assembly with two dowels

and two Barrel Bolts (A) and Barrel Nuts (B). Tighten bolts with the Hex Wrench (F).

Attach the Seat Brace (6), with the curved edge up, to the Back with the dowel and Screw (E).

Attach the Front Apron (4) to the left leg assembly and Seat Brace (6) over the dowels and

fasten in place with Barrel Bolt (A) and Barrel Nut (B) and Screws (E).

Glue three 10x40mm Wood Dowels (C) into the upper holes in the Right Leg Assembly (2) as

URE 1. Attach the leg assembly to the front apron and back as before.

shown in FIG

x11

FIG. 2

2) Slip the Seat (5) down between the legs onto the seat brace. Attach to the leg assemblies

with Screws (E) through the two predrilled holes in each end of seat into the frame as shown

in FIGURE 2.

Insert a Screw (E) through each of the holes in the bottom of the center Seat Brace (6)

into the slats.

85992KFRS1 Chelsea Bench

ASSEMBLY INSTRUCTIONS

85992KFRS1 – Page 3