Garden Wood Furniture Somerset Glider 44 961KFSIc 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Garden Wood Furniture Somerset Glider 44 961KFSIc에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Wood Furniture Somerset Glider 44 961KFSIc 11 페이지.

페이지 인쇄

Fig. 5

5. Glue 10x40 Wood Dowels (C) in the two outer holes of the three-hole groups in the Left and

Right Glider Leg Assemblies (Qc & Rc). Attach the Glider Leg Supports (Sc) to the Left Glider

Leg Assembly (Qc) with Dowels (C) and 7x70mm Hex Screws (Ac). Attach the Right Glider

Leg Assembly (Rc) in the same way. The front and back leg supports will not touch the ground.

This is to allow for any uneven ground between the legs. See Figure 5.

6. NOTE: The Rocker Arms (I) are are slightly bent so the attachment holes on each end will be flush

against the glider and bench legs.

Insert a 6x50mm Hex Bolt (Ec) through a Washer (Fc) and the hole in the front lower corner of the

Left Leg Assembly (Lc), another Washer (Fc) and into a Rocker Arm (I). Attach a Hex Nut (Gc) and

tighten. Repeat for the right front leg and both back legs.

Repeat the above step to attach the top of the Rocker Arm (I) to the top holes in the arms of the

Left and Right Glider Leg Assemblies as shown in Figure 6.

BACK

FRONT

Arm of Left Glider

Leg Assembly

Fig. 6

961KFSIc – Page 5 – 10/08